Alaska Low Profile Tonneau Cover — Ram 1500
A flush-fit hard cover built for the Ram 1500’s 5.7 ft bed, sitting below the top of the bed rail for a clean line and less wind resistance driving into a headwind. Finished with the same cold-flex seal system used across the Alaska lineup. Mounts with bed rail clamps — no drilling required.
Shop This CoverOverview
This low profile cover is built for the Ram 1500’s bed and designed to sit flush below the bed rail instead of raised on top of it like a standard hard folding cover. That flush profile keeps the truck’s factory lines clean and cuts wind resistance on the highway — useful year-round, but especially noticeable driving into a headwind on an exposed stretch of road.
Under the flush shell, it’s still a rigid, load-rated hard cover with the same cold-flex seal system as the rest of the lineup — you’re not trading winter performance for the cleaner look.
Fitment note: This cover does not fit RamBox-equipped Ram 1500 trucks — the raised bin lids interfere with the clamp points. A RamBox-specific fitment is not currently available in this style.
Built From
Panel Construction
A low-profile aluminum-framed composite panel sits flush with the bed rail while still supporting distributed static weight.
Cold-Flex Seals
EPDM rail and tailgate seals chosen for how they hold compression through repeated freeze-thaw cycles.
Ice-Rated Hardware
Corrosion-resistant mounting hardware keeps the flush clamp system secure through a season of road salt.
Finish
A UV-stable matte finish resists fading and holds up to the abrasion of blowing snow and grit.
Confirming Your Ram 1500’s Fit
Bed length has to match exactly for the flush profile to seat correctly against the rail. This cover is built for the Ram 1500’s 5.7 ft bed — check your bed length on the door jamb sticker or in your owner’s manual before ordering, since the Ram 1500 is also sold with 6.4 ft bed options depending on cab configuration.
How Installation Works
- Clean the bed rails. Wipe down the factory rail where the low-profile clamps will sit.
- Position the panel. Set the cover squarely on the rail so it sits flush and even on both sides.
- Clamp and torque to spec. Hand-tighten the included clamps, then torque down evenly.
- Check the flush line. Confirm the panel sits level with the bed rail along its full length.
- Test the latches. Open, close, and lock the cover to confirm smooth operation before your first drive.
Specifications
Why This Cover
- Sits flush below the bed rail for a clean, factory-integrated look
- Lower profile reduces wind drag compared to a raised hard cover
- Same cold-flex seal system used across the full Alaska lineup
- Rail clamp mounting means no drilling into the F-150’s bed
- Load-rated panel handles the same snow load as our standard hard cover
Frequently Asked Questions
Does this fit the 2019–2024 Ram 1500?
Yes, this cover is fitted for Ram 1500 model years 2019–2024 with a 5.7 ft bed. Check your bed length on the door jamb sticker if you’re unsure which bed size your truck has.
Will it work with the RamBox cargo system?
No — this cover is not compatible with RamBox-equipped Ram 1500 trucks. The raised bin lids interfere with the mounting points.
Can I install this by myself in cold weather?
Yes. It ships in pre-assembled sections and mounts with included rail clamps — most owners complete the install solo in under an hour. Just make sure the rail is dry before mounting.
Can I still stand or stack cargo on the closed cover?
Yes, within reason. The panel is rated to support distributed static weight, including a realistic overnight snow load — but avoid concentrated point loads like standing on one spot for extended periods.
How do I maintain the seals through winter?
Wipe the rail and tailgate seals down periodically and avoid harsh solvents. Replacement cold-flex seal kits are sold separately if a seal ever needs attention.
Ready to Cover Your Ram 1500 Bed?
Flush factory fit, cold-flex sealed, no-drill mount — fitted to your exact truck.
Shop This Cover